CX-BOND - Construction Grade Structural Adhesive
Ideal as a fixent for concrete, asphalt, block and pavinging stone surfaces.
Secures over wide temperature and weather condition range -50 to 130 ambient
Attach plastics, metals, wood, stone
Flexproof XR 1 is a one component sealant with a high elasticity and adherence, especially composed prepolymer mixture to withstand the high alkalinity of the concrete which practically allows no water absorption to take place even with continuous water exposure. It is installed right at the place where the problem of wet construction emerges at the surface of the construction and also can be applied either on dry or wet concrete, steel, stainless steel, stone and plastic without using a primer in advance. Flexproof XR 1 is available in different viscosities, which offers the consumer the choice of using the perfect viscosity for the best installation. It can be installed in one or two layers depending on the conditions to which the device is subjected. In case of installing Flexproof XR1 in two layers, we recommend to embed the specially designed Flexproof Reinforcement Mesh in between the two layers. Furthermore Flexproof XR 1 is characterised by a high resistancy against UV and atmospheric conditions. Thus the sealant can be applied as an external sealant for exposed construction applications. The possibility of covering Flexproof X R 1 with a layer of fine sand offers various options in renovation work when the need to apply a covering or addition finishing layers on top. As a result, non mineral materials can also be perfectly sealed with Flexproof XR1. In addition to the special adaptability of the composition, particular praise must also be given to the sealant’s high bonding and adhesive tensile strength values. As a result, cracks and joints (tested to 5mm at 4 bar) as well as surfaces can be permanently sealed.